Mounting - GH extended ceiling bracket

GH extended ceiling bracket, free length for straight rail and curve

Use

The GH extended ceiling bracket, free length (with aluminium profile) is used in connection with suspended ceiling constructions. The bracket is primarily used in rooms with high ceilings in order to be able to install the rail system beneath the suspended ceiling at an ordinary installation and users height. 
 

Installation

The GH extended ceiling bracket, free length, is joined by sawing the aluminium tube to the required length.

Note

There is no limitation with regard to the length of the GH suspended ceiling bracket, free length. But in connection with longer lengths the bracket should be anchored to the wall with a stabiliser bracket to stabilise the rail system and ensure that the construction is solid even with a long suspension. 

GH extended ceiling bracket, free length - for sloping ceiling
  

Use

An adjustable angle GH extended ceiling bracket, free length (with aluminium profile) is used in rooms with sloping ceilings.

Installation

An adjustable angle GH extended ceiling bracket, free length, is connected by sawing the aluminium tube to the required length. The aluminium tube is first mounted on the U profile of the bracket. The bracket is then installed on the ceiling in the same way as with the other suspended ceiling brackets - but the angle can be adjusted on this type. 

Note

Must not be used in systems with a maximum load over 250 kg.

GH extended ceiling bracket, straight lowered (with aluminium profile if visible)

Use
In connection with suspended ceiling constructions. The bracket is primarily used in rooms with high ceilings in order to be able to install the rail system beneath the suspended ceiling at an ordinary installation and unsers’ height.

 

Installation
The GH ceiling bracket straight lowered is joined by sawing the aluminium tube to the required length and typically only the part that is visible beneath a suspended ceiling. A rosette is then mounted on the aluminium tube next to the suspended ceiling.

Note
There is a limitation with regard to the length of the GH ceiling bracket straight lowered of maximum 2000 mm. However, when the length of the bracket is above 300 mm, the brackets should be anchored to the wall or ceiling with stabilizing brackets in order to stabilize the rail system and ensure that the construction is stable.